Oil & Gas Drilling

Performance You Need. Made in the USA.

For more than 30 years, AquaSol has been a trusted partner to the oil and gas industry, delivering starch-based drilling fluid additives that enhance performance, improve wellbore stability, and support sustainable operations. Our products are biodegradable, Made in the USA, and engineered to meet the demands of both water-based and oil-based drilling systems.

Engineered for Efficiency and Reliability

AquaSol’s starch-based polymers are designed to:

  • Reduce fluid loss for improved well control and filtration.
  • Enhance rheology and gel strength for better hole cleaning.
  • Deliver shale inhibition and clay stabilization in reactive formations.
  • Perform across multiple brine environments, including NaCl, CaCl₂, and CaBr₂ systems.

Water-Based and Oil-Based Systems

Our water-based fluid additives provide consistent fluid-loss control and rheological performance across fresh and brine systems, offering a biodegradable and cost-effective alternative to PACs and CMCs.
AquaSol’s oil-based fluid products deliver superior performance in diesel, mineral oil, and Distillate 822 systems, enhancing electrical stability while maintaining viscosity and emulsion balance.

Specialty Products for Advanced Drilling

  • AquaVisc OG — a starch-based rheology modifier designed to replace or reduce Xanthan Gum, lowering costs while maintaining stability.
  • ClayBloc — a high-performance clay inhibitor that prevents swelling and water uptake, ensuring cleaner, more efficient drilling operations.

All AquaSol products are biologically stable, have an indefinite shelf life in dry form, and are field-proven to outperform traditional synthetic and cellulose-based additives.

Why Choose AquaSol

  • Sustainable, bio-based formulations
  • Made in the USA with consistent quality control
  • Technical support from in-house chemists
  • Proven performance in diverse drilling conditions
  • Flexible, customer-focused solutions

AquaSol is more than a supplier; we’re your technical partner in performance.
Contact us today to learn how our starch-based additives can improve efficiency, lower costs, and support your next drilling project.

Products

AquaBloc FL

AquaBloc FL is a highly modified, starch-based fluid loss control additive designed for use in water-based drilling fluids. It performs effectively in freshwater and brine systems, including saturated brines, and maintains stability at temperatures up to 300°F.

As a bio-based, sustainable alternative to traditional PAC or CMC products, AquaBloc FL delivers comparable performance pound-for-pound while reducing environmental impact. Manufactured in the USA with consistent quality control, it offers a cost-effective and reliable solution for improving filtration control and maintaining drilling fluid performance under demanding conditions.

AquaPak

AquaPak is a starch-based fluid loss control additive formulated to deliver reliable performance in water-based drilling fluids. Designed as a direct, cost-effective replacement for LV PAC, AquaPak provides equivalent or superior filtration control at a more economical price point.

Made in the USA and developed from renewable materials, AquaPak supports sustainable drilling operations while maintaining consistent performance across a wide range of drilling conditions. Its bio-based design and proven field results make AquaPak a dependable solution for operators seeking efficiency without compromise.

AquaBloc

AquaBloc is a carboxymethyl starch (CMS), also known as poly anionic starch (PAS), formulated as a fluid loss control additive for use in water-based drilling fluids. Engineered through a specialized manufacturing process, AquaBloc delivers exceptional performance with ultra-low viscosity, allowing it to be classified as an ultra-low (UL) additive.

Developed from renewable, starch-based materials, AquaBloc provides a sustainable, Made-in-USA alternative to conventional synthetic additives. Its low-viscosity profile ensures efficient blending, optimized fluid rheology, and superior filtration control, making it an ideal choice for operators seeking reliable performance and environmental responsibility in their drilling operations.

AquaBloc HT Series

AquaBloc HT Series products are advanced starch-based fluid loss control additives designed for water-based drilling fluids. Developed for high-temperature and high-performance applications, the HT Series offers enhanced tolerance to heat, shear, and pH variations compared to standard AquaBloc formulations.

Manufactured in the USA and formulated from renewable, bio-based materials, the AquaBloc HT Series delivers consistent, reliable performance across demanding drilling environments. These additives provide the same environmental advantages and cost efficiency that AquaSol products are known for, while extending operational stability and effectiveness in extreme conditions.

AquaBloc HT

AquaBloc HT is a starch-based fluid loss control additive designed for use in water-based drilling fluids operating under demanding conditions. Engineered for enhanced tolerance to heat, shear, and pH, AquaBloc HT provides consistent performance where standard starch additives may degrade.

This advanced formulation performs exceptionally well in freshwater and brine systems, including those used in clean fluid mud applications. As part of AquaSol’s Made in USA product line, AquaBloc HT delivers the thermal stability, reliability, and eco-friendly performance today’s drilling operations demand, making it a trusted choice for contractors who need durability without compromising sustainability.

AquaBloc AW

AquaBloc AW is a starch-based, ultra-low viscosity fluid loss control additive designed for use in water-based drilling fluids. Produced as a poly anionic polysaccharide solution, AquaBloc AW provides effective filtration controlwhile maintaining minimal impact on rheology, making it ideal for applications where low viscosity is essential.

Formulated from renewable, bio-based materials and manufactured in the USA, AquaBloc AW delivers consistent, sustainable performance across a wide range of drilling environments. Its ultra-low viscosity profile ensures fast mixing, uniform dispersion, and seamless integration into drilling systems, offering a dependable and environmentally conscious solution for modern drilling operations.

AquaVisc OG

AquaVisc OG is an advanced rheology modifier designed for water-based drilling fluids, offering a bio-based alternative to xanthan gum. Formulated to build strong low-end rheology, it enhances hole cleaning efficiency and fluid suspension in a wide range of drilling conditions.

Working synergistically with AquaSol’s fluid loss control additives, AquaVisc OG delivers both viscosity and filtration benefits, improving overall system stability and performance. Proudly Made in the USA, it combines sustainability, consistency, and cost efficiency, helping drilling operations achieve optimal results with an environmentally responsible solution.

AquaDril

AquaDril is a high-performance, starch-based fluid loss control additive designed for use in water-based drilling fluids. AquaDril provides consistent fluid loss control while maintaining excellent thermal stability and filtration performance.

Formulated from renewable materials and manufactured in the USA, AquaDril offers a biodegradable, environmentally responsible solution that meets strict performance and compliance standards. The polymers used in AquaDril are certified to pass the Microtox test, demonstrating its non-toxic profile and suitability for environmentally sensitive drilling operations.

ClayBloc Plus

ClayBloc Plus is an NSF-certified, cationic liquid clay inhibitor engineered to reduce bit balling, clay accumulation, and sticking issues commonly encountered when drilling through reactive clay formations.

Formulated from environmentally responsible ingredients, ClayBloc Plus offers powerful clay stabilization without compromising performance or safety. It is effective in both clay-bearing and clay-free systems, providing consistent results across a wide range of drilling environments.

Manufactured in the USA under strict quality standards, ClayBloc Plus delivers proven performance, environmental compliance, and reliability, making it a trusted choice for contractors focused on efficiency and sustainability.

Organosol Series

OrganoSol is a naturally based polymer engineered for high-temperature, high-pressure (HTHP) fluid loss control in non-aqueous fluid systems (NAFs). As the use of NAFs continues to expand in the drilling industry, OrganoSol provides a sustainable solution that bridges performance and environmental responsibility.

Developed to complement AquaSol’s water-based additive portfolio, OrganoSol extends the company’s starch-based expertise into the non-aqueous sector, delivering consistent fluid loss performance under demanding conditions. Proudly Made in the USA, OrganoSol embodies AquaSol’s commitment to innovation, sustainability, and technical excellence, offering drilling operators a bio-based alternative without compromising efficiency or reliability.